Why Convert M.2 NVMe to U.2?
Many servers, workstations and professional storage systems already use U.2 drive bays or removable U.2 enclosures.
However, sourcing suitable U.2 SSDs can sometimes be challenging, particularly when specific capacities, performance levels or budgets are involved.
With the ICY DOCK EZConvert MB705 series, you can install a compatible M.2 NVMe SSD into a U.2 form-factor adapter, allowing you to continue using your existing U.2 storage infrastructure.
How Does It Work?
The MB705 adapter converts the physical M.2 SSD form factor into a U.2-style drive with an SFF-8639 connector.
It does not convert SATA to NVMe or change the SSD's underlying protocol.
This solution is particularly useful for:
Servers and workstations with existing U.2 drive bays
System integrators requiring greater SSD sourcing flexibility
Removable NVMe storage applications
Testing and development environments
MB705M4P-S
MB705M2P-B
For 7mm U.2 Applocations
7mm Ultra-Slim U.2 Form Factor
Full-Metal Construction
Integrated One-Piece Metal Lid
Open-Air Cooling Design
For 15mm U2 Applicaiton
9.5mm Converter Height
Fits 15mm U.2 Trays / Bays
Removable Aluminum Heat-Sink Lid
Enhanced Passive Cooling
Built for Removable M.2 NVMe Workflows
Supports M.2 2230, 2242, 2260, and 2280 NVMe SSDs for faster installation and replacement.
Full-metal construction and thermal pad contact help transfer heat from the M.2 SSD to the enclosure.
The bridge connector helps reduce repeated wear on the M.2 SSD gold fingers during removal and reinsertion.
Repeated system-level insertion and removal takes place through the more durable U.2 interface.
Can M.2 NVMe be Hot-Swapped Through U.2?
“Hot-Plug May Be Possible in Supported Systems”
Host System Support
The host must support PCIe/NVMe hot-plug.
U.2 Backplane Compatibility
The U.2 backplane must support hot-plug operation.
BIOS / UEFI Configuration
Hot-plug functionality must be enabled and supported by the platform firmware.
OS & Driver Support
The operating system and NVMe drivers must support hot-plug operation.
System Validation Support
Verify hot-plug functionality with the complete system configuration.
Keep U.2. Gain More SSD Choices
U.2/U.3 SSDs can be costly or difficult to source.
Use widely available M.2 NVMe SSDs with EZConvert MB705.
Keep your existing U.2 infrastructure and removable 2.5" form factor.
